Polyurea Special Coating System (NUKOTE)
NUKOTE Polyurea: A Single Solution for Industrial Protection
NUKOTE Polyurea: A special coating system that protects buildings, water treatment facilities, buried pipelines, marine structures, and defense applications with a single material. It boasts 6,000 Psi tensile strength, 450% elongation, and 0% VOC.
How extensively can polyurea protect?
A single material provides solutions for everything from building waterproofing to water treatment facilities, the exterior of buried pipelines, marine facilities, and defense and nuclear power.
Polyurea is an ultra-fast curing special coating material that reacts with isocyanate and amine curing agents to cure within seconds, forming a seamless waterproof and anti-corrosion film. HIGHCOATIC is the exclusive distributor in Korea for NUKOTE, USA, applying this single material for protection across all industries.
What are the key physical properties of polyurea?
It boasts a hardness of Shore D 80±5, elongation of 450%, tensile strength of 6,000 Psi, 0% VOC, and ultra-fast curing performance of 4-20 seconds.
| Property | Value |
|---|---|
| Hardness | Shore D 80±5 |
| Elongation | 450% |
| Tensile Strength | 6,000Psi (approx. 42MPa) |
| Curing Speed | 4-20 seconds ultra-fast curing |
| Chemical Resistance | Resistant to dozens of chemicals, including 70% sulfuric acid (50% at high temperature) |
| Temperature Resistance | 220℃ ~ -50℃ |
| Volatile Organic Compounds (VOC) | 0% · Certified for potable water use |
| Performance Retention | 3-5 times longer than existing epoxy, urethane, and FRP (10-20+ years) |
※ The above values may vary depending on the product and site conditions.
How are the application fields categorized?
It is divided into 5 fields: Buildings, Water Treatment Facilities, Exterior of Buried Pipelines, Marine/Ship/Industrial Facilities, and Automotive/Defense/Nuclear Power.
Problems, solutions, and case studies for each field can be found on the detailed field pages below.
Other Business Areas
Site Consultation
The applicable method and cost vary depending on site conditions. Please leave your site information, and our representative will review it and contact you.
108 Munhwa-ro, Idong-eup, Cheoin-gu, Yongin-si, Gyeonggi-do
TEL 031-338-3689 · FAX 031-339-3689
Sub-Areas
Applied Products
Product selection varies based on site conditions and performance requirements. Start by reviewing the fundamental properties of polyurea and the distinctions between application methods.
Related Projects
View all case studies in this fieldFrequently Asked Questions
What are the differences between SIPP, CIPP, and PVC lining methods?
CIPP is a cured-in-place method for large pipes, SIPP is a spray-in-place method for small pipes, and PVC lining involves adhering an internal sheet. While most companies specialize in only one rehabilitation method, HIGHCOATIC can handle all three, allowing us to select the optimal method tailored to specific site conditions.
What is polyurea?
It is an elastic coating material developed by Texaco in the early 1980s in the United States. It boasts an elongation of over 400%, concrete adhesion of over 3.0 N/mm², and heat resistance of 120°C for gases and 85°C for liquids. It is widely used for waterproofing, abrasion resistance, chemical resistance, and corrosion protection.
Do you hold environmental certifications?
All products have received eco-friendly certification for use in drinking water and food facilities. They contain 0% volatile organic compounds (VOCs) and have completed certification for use in drinking water and food facilities from relevant authorities in the US, Singapore, Canada, China, and other countries. Additionally, they hold ASTM E84 Class 1 flame spread certification.
What is HIGHCOATIC's relationship with NUKOTE?
HIGHCOATIC is the exclusive distributor of NUKOTE in South Korea. NUKOTE is an industrial protective coating manufacturer headquartered in Texas, USA, supplying over 140 countries worldwide and boasting a product lineup of over 80 types.
How can I request a quote?
Please leave your project details on the Quote Request page, and a representative will review them and contact you. For pipe rehabilitation, please provide the diameter, length, and current condition. For building waterproofing, please provide the area, number of floors, and whether existing waterproofing is present. This information will enable us to provide a more accurate quote. Phone consultations are available at 031-338-3689.
Other Business Areas
Polyurea Special Coating System Need a Quote?
Let us know your site's scale and condition, and we will review applicable methods and products and get back to you. Phone consultations are available at 031-338-3689.